Plasmon-Mediated Organic Photoelectrochemistry Applied to Amination Reactions.

Organic electrochemistry is currently experiencing an era of renaissance, which is closely related to the possibility of carrying out organic transformations under mild conditions, with high selectivity, high yields, and without the use of toxic solvents. Combination of organic electrochemistry with alternative approaches, such as photo-chemistry was found to have great potential due to induced synergy effects. In this work, we propose for the first time utilization of plasmon triggering of enhanced and regio-controlled organic chemical transformation performed in photoelectrochemical regime. The advantages of the proposed route is demonstrated in the model amination reaction with formation of C-N bond between pyrazole and substituted benzene derivatives. Amination was performed in photo-electrochemical mode on the surface of plasmon active Au@Pt electrode with attention focused on the impact of plasmon triggering on the reaction efficiency and regio-selectivity. The ability to enhance the reaction rate significantly and to tune products regio-selectivity is demonstrated. We also performed density functional theory calculations to inquire about the reaction mechanism and potentially explain the plasmon contribution to electrochemical reaction rate and regioselectivity.

Speciation and Reactivity Control of Cu-Oxo Clusters via Extraframework Al in Mordenite for Methane Oxidation.

The stoichiometric conversion of methane to methanol by Cu-exchanged zeolites can be brought to highest yields by the presence of extraframework Al and high CH4 chemical potentials. Combining theory and experiments, the differences in chemical reactivity of monometallic Cu-oxo and bimetallic Cu-Al-oxo nanoclusters stabilized in zeolite mordenite (MOR) are investigated. Cu-L3 edge X-ray absorption near-edge structure (XANES), infrared (IR), and ultraviolet-visible (UV-vis) spectroscopies, in combination with CH4 oxidation activity tests, support the presence of two types of active clusters in MOR and allow quantification of the relative proportions of each type in dependence of the Cu concentration. Ab initio molecular dynamics (MD) calculations and thermodynamic analyses indicate that the superior performance of materials enriched in Cu-Al-oxo clusters is related to the activity of two µ-oxo bridges in the cluster. Replacing H2O with ethanol in the product extraction step led to the formation of ethyl methyl ether, expanding this way the applicability of these materials for the activation and functionalization of CH4. We show that competition between different ion-exchanged metal-oxo structures during the synthesis of Cu-exchanged zeolites determines the formation of active species, and this provides guidelines for the synthesis of highly active materials for CH4 activation and functionalization.

The DFT Approach to predict 13C NMR chemical shifts of hydrocarbon species adsorbed on Zn-modified zeolites.

13C MAS NMR spectroscopy is a powerful technique to study the mechanisms of hydrocarbon transformations on heterogeneous catalysts. It can reliably identify the surface intermediates and the adsorbed products based on the analysis of their 13C chemical shifts, δ(13C). However, the unambiguous assignment of the detected signals is always a challenge due to the uncertainty of the nature of the surface intermediates formed and the mechanism of adsorbed species interaction with active sites. The way to solve this problem is the application of DFT calculations to predict chemical shifts for the expected intermediate hydrocarbon species. Herein, the methodology for δ(13C) chemical shift calculations for adsorbed species has been proposed. It includes: (i) zeolite framework optimization with periodic DFT (pPBE); (ii) medium-sized cluster geometry optimization with hybrid GGA (PBE0), and (iii) σ(13C) values calculation followed by δ(13C) estimation using the linear regression method. It is inferred that the TPSS/cc-pVTZ method provides the best computational cost/accuracy ratio for the set of adsorbed hydrocarbon species that was previously detected experimentally on the surface of Zn-containing zeolites. The drawbacks of the computation method have also been revealed and discussed.

Property-activity relations of multifunctional reactive ensembles in cation-exchanged zeolites: a case study of methane activation on Zn2+-modified zeolite BEA.

The reactivity theories and characterization studies for metal-containing zeolites are often focused on probing the metal sites. We present a detailed computational study of the reactivity of Zn-modified BEA zeolite towards C-H bond activation of the methane molecule as a model system that highlights the importance of representing the active site as the whole reactive ensemble integrating the extra-framework ZnEF2+ cations, framework oxygens (OF2-), and the confined space of the zeolite pores. We demonstrate that for our model system the relationship between the Lewis acidity, defined by the probe molecule adsorption energy, and the activation energy for methane C-H bond cleavage performs with a determination coefficient R2 = 0.55. This suggests that the acid properties of the localized extra-framework cations can be used only for a rough assessment of the reactivity of the cations in the metal-containing zeolites. In turn, studying the relationship between the activation energy and pyrrole adsorption energy revealed a correlation, with R2 = 0.80. This observation was accounted for by the similarity between the local geometries of the pyrrole adsorption complexes and the transition states for methane C-H bond cleavage. The inclusion of a simple descriptor for zeolite local confinement allows transferability of the obtained property-activity relations to other zeolite topologies. Our results demonstrate that the representation of the metal cationic species as a synergistically cooperating active site ensembles allows reliable detection of the relationship between the acid properties and reactivity of the metal cation in zeolite materials.

The accuracy challenge of the DFT-based molecular assignment of 13C MAS NMR characterization of surface intermediates in zeolite catalysis.

The influence of the model and method choice on the DFT predicted 13C NMR chemical shifts of zeolite surface methoxide species has been systematically analyzed. Twelve 13C NMR chemical shift calculation protocols on full periodic and hybrid periodic-cluster DFT calculations with varied structural relaxation procedures are examined. The primary assessment of the accuracy of the computational protocols has been carried out for the Si-O(CH3)-Al surface methoxide species in ZSM-5 zeolite with well-defined experimental NMR parameters (chemical shift, δ(13C) value) as a reference. Different configurations of these surface intermediates and their location inside the ZSM-5 pores are considered explicitly. The predicted δ value deviates by up to ±0.8 ppm from the experimental value of 59 ppm due to the varied confinement of the methoxide species at different zeolite sites (model accuracy). The choice of the exchange-correlation functional (method accuracy) introduces ±1.5 ppm uncertainty in the computed chemical shifts. The accuracy of the predicted 13C NMR chemical shifts for the computational assignment of spectral characteristics of zeolite intermediates has been further analyzed by considering the potential intermediate species formed upon methane activation by Cu/ZSM-5 zeolite. The presence of Cu species in the vicinity of surface methoxide increases the prediction uncertainty to ±2.5 ppm. The full geometry relaxation of the local environment of an active site at an appropriate level of theory is critical to ensure a good agreement between the experimental and computed NMR data. Chemical shifts (δ) calculated via full geometry relaxation of a cluster model of a relevant portion of the zeolite lattice site are in the best agreement with the experimental values. Our analysis indicates that the full geometry optimization of a cluster model at the PBE0-D3/6-311G(d,p) level of theory followed by GIAO/PBE0-D3/aug-cc-pVDZ calculations is the most suitable approach for the calculation of 13C chemical shifts of zeolite surface intermediates.

Methane Activation on H-ZSM-5 Zeolite with Low Copper Loading. The Nature of Active Sites and Intermediates Identified with the Combination of Spectroscopic Methods.

Cu-modified zeolites have enormous potential as the catalysts facilitating the conversion of methane to methanol. It becomes important to investigate the active sites and the reaction mechanisms involved. In this paper, several spectroscopic methods such as UV-vis diffuse reflectance spectroscopy (UV-vis DRS), pulse electron paramagnetic resonance (EPR), diffuse reflectance Fourier transform infrared spectroscopy, and solid-state (13C MAS) NMR have been employed to characterize the state of the Cu sites and the intermediates formed during the catalyst activation and methane-to-methanol transformation on Cu/H-ZSM-5 zeolite with low (0.10 wt %) Cu content. UV-vis DRS and EPR data imply the presence of two types of Cu2+ cations bound to the zeolite framework Si-O--Al sites (Z). One of them is a species of the type Z[Cu(II)O] or Z[Cu(II)(OH)] with extra-framework O- or OH- ligands. The other one refers to Z2Cu(II) species without extra-framework O-containing ligands. CW EPR studies reveal that the Z2Cu(II) species are the major part of the Cu(II) sites present in the zeolite. 1H HYSCORE and DRIFTS data are supportive of the formation of a molecular complex of methane and Z2Cu(II) species, with a strongly polarized C-H bond and a 3.3 Å separation between the hydrogen atom of methane and Cu. 13C MAS NMR provides evidence for the formation of both the surface methoxy intermediate and physisorbed methanol. It is suggested that experimentally identified Z[Cu(II)O] or Z[Cu(II)(OH)] are those sites that provide a homolytic cleavage of the methane C-H bond to yield surface bound methoxy species and/or methanol molecule, the possibility that has been recently justified with density functional theory ( Kulkarni et al. Catal. Sci. Technol. 2018 , 8 , 114 ). The comparison of the amount of the surface methoxy intermediates formed and the number of different Cu(II) sites present in the zeolite allowed us to conclude the involvement of Z2Cu(II) sites in methane C-H bond activation. The mechanism of methane activation on Z2Cu(II) sites has been proposed. It includes two steps: (1) the formation of the molecular complex of methane with Z2Cu(II); (2) heterolytic dissociation of the polarized C-H bond affording surface copper(II) hydride and methoxy species, both bound to zeolite framework Si-O--Al sites.